Product Spotlight - SUNFAB SAP Pumps

SUNFAB SAP PUMPS

VHS Hydraulic Components is a Sunfab Certified Distributor of Sunfab SAP Pumps, but also stock and supply a wide range of Sunfab Single Flow Pumps within the Sunfab SAP range of pumps. On offer are 12 different sizes in the range of 12-130 cm³ with pressure up to 400 bar.

The Sunfab SAP pumps are developed to meet the market requirements for reduced weight in combination with demanding operation. The weight has been reduced by 20% compared to previous pump generations and is helped by using lightweight aluminium alloy housing. 

Sunfab SAP-series pump overview:

• Max pressure 400 bar

• High rotation speed

• Compact size

• High efficiency

• Long life due to high demands on material selection, such as bearings, seals, etc.

Key benefits of the Sunfab SAP Pump include:

• Corrosion free housing.

• Reduced vehicle weight.

• Reduced bending moment on PTO.

• Easier handling during assembly on PTO.

• Light weight metal casing design.

• Smooth operation over the entire speed range.

• Long life due to high demands on material selection, such as bearings, seals, etc.

• Less heat generation due to better ability to dissipate heat through housing.

DISCOVER THE SUNFAB SAP SINGLE FLOW PUMP RANGE:

Sunfab SAP 012-108 DIN

SAP 012-108 DIN is a series of light weight casing piston pumps with a fixed displacement for demanding mobile hydraulics.
SAP 012-108 DIN covers the displacement range 12-108 cmᶟ⁄rev. at a maximum pressure of 400 bar. It is a modern, compact pump which meets the market’s high demands on flow performance, pressure, efficiency and small installation dimensions. The pump is either mounted directly on the power take-off or on a frame bracket via an intermediate shaft.

Sunfab SAP 084, 108 DIN Optimised

SAP DIN Optimised is a series of piston pumps with a fixed displacement for demanding mobile hydraulics.
SAP 084, 108 DIN Optimised covers the displacement range 84 and 108 cmᶟ⁄rev. at a maximum pressure of 400 bar. It is a modern, compact pump which meets the market´s high demands on flow performance, pressure, efficiency and small installation dimensions. It is either mounted directly on the power take-off or on a frame bracket via an intermediate shaft.




Sunfab SAP 084, 108 DIN OFI

SAP DIN Optimised for Injector is an externally drained variant of the SAP series, which offers a very high oil flow in combination with the Sunfab injector K-Jet 2.
SAP 084, 108 DIN Optimised for Injector is suitable for hydraulic motor operations in closed hydraulic systems with injector K-Jet 2 for pressurisation of the suction side. This gives excellent speed characteristics and high flows.

WE ARE A SUNFAB CERTIFIED DISTRIBUTOR

To enquire about Sunfab SAP Pumps, please contact VHS Hydraulic Components on: 0114 276 4430   / E: info@hydraulic-components.net or visit our website at: https://www.hydraulic-components.net/ 
VHS Hydraulic Components is an official Sunfab UK distributor. VHS Hydraulic Components supplies Sunfab SAP Bent Axis Piston Pumps, Sunfab SCP Bent Axis Piston Pumps, Sunfab SLPD Twin Flow Axial Piston Pumps, Sunfab SVH Variable Displacement Axial Piston Pumps, Sunfab SCM Fixed Displacement Bent Axis Piston Motors and Sunfab Anti-cavitation Valves.